AVK SWING CHECK VALVE, METAL SEATED
Lever & Weight, AS/NZS 4087 B5, PN16, DN350-DN600
Contact
AVK Australia Civil
559A Grand Junction Road Wingfield SA 5013 Sales and Technical enquiry
Metal seat swing check valve. For drinking water and neutral liquids to max. 60°C
AVK series 41 swing check valve with metal seat, for use in pumping applications to prevent back flow. The valves are suitable for drinking water and waste water applications. The disc is connected to the shaft via a flexible bush which allows the disc and valve seat to perfectly align providing optimum sealing performance. All interior parts are manufactured from corrosion resistant metals or coated with drinking water approved epoxy coating. The series 41 valves are available in many configurations, including closed bushing, free acting or with a lever and weight to mitigate pressure surges.
| Variant 41/36-011 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile Iron |
| DN: | DN350 - DN600 |
| PN: | PN16 |
Features
- AS 4794 face to face available on request, refer to related datasheet 41-36-PO1-AU for details
- Aluminium Bronze seat and face rings, sealing performance in accordance with AS 4794
- The light weight disc assembly requires minimal force to open/close
- Shaft is fitted in the bonnet allowing maintenance to occur without removing the valve from the pipeline
- Suitable for horizontal and vertical installation
- Full bore with low head loss
- Bonnet gasket sits in a recessed groove between bonnet and body preventing blow-out
- Bosses on the valve body allow for installation of pressure gauge, by-pass, etc.
- Blue fusion bonded epoxy according to AS/NZS 4158
- Potable Water Approval to AS/NZS 4020
- Cracking Pressure = 10kPa
Downloads
| AVK_swing_check_valve_animation.mp4 |
Reference nos. and dimensions:
| AVK ref. no. | DN mm |
Flange drilling |
L mm |
H mm |
H3 mm |
W mm |
W1 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|
| 41-350-36-0281206 | 350 | AS 4087 B5 | 800 | 419 | 689 | 731 | 441 | 257 |
| 41-400-36-0281206 | 400 | AS 4087 B5 | 900 | 470 | 765 | 801 | 476 | 345 |
| 41-450-36-0281206 | 450 | AS 4087 B5 | 1000 | 518 | 837 | 871 | 511 | 477 |
| 41-500-36-0281206 | 500 | AS 4087 B5 | 1100 | 570 | 935 | 931 | 541 | 637 |
| 41-600-36-0281206 | 600 | AS 4087 B5 | 1300 | 630 | 1060 | 1047 | 600 | 851 |
Components
| 1. | Body | Ductile iron GJS-500-7 (GGG-50) |
| 2. | Washer | Stainless steel A4 |
| 3. | Nut | Stainless steel A4 |
| 4. | Stud bolt | Stainless steel A4 |
| 5. | Face ring | Alu-bronze CC331G (AB1) |
| 6. | Seat ring | Alu-bronze CC331G (AB1) |
| 7. | Bonnet | Ductile iron GJS-500-7 (GGG-50) |
| 8. | Bolt | Stainless steel A4 |
| 9. | O-cord | EPDM rubber |
| 10. | Guide bush | EPDM rubber |
| 11. | Washer | Stainless steel A4 |
| 12. | Split pin | Stainless steel A4 |
| 13. | Castle nut | Stainless steel A4 |
| 14. | Stud bolt | Stainless steel A4 |
| 15. | Hinge arm | Ductile iron GJS-500-7 (GGG-50) |
| 16. | Disc | Ductile iron GJS-500-7 (GGG-50) |
| 17. | Protective bush | EPDM rubber |
| 18. | Washer | Stainless Steel 1.4401 (316) |
| 19. | Bolt | Stainless steel A4 |
| 20. | Bolt | Stainless steel A4 |
| 21. | Washer | Stainless steel A4 |
| 22. | Lever | Ductile iron GJS-500-7 (GGG-50) |
| 23. | O-ring | EPDM rubber |
| 24. | Bushing, open | Brass, DZR CW602N (CZ132) |
| 25. | O-ring | EPDM rubber |
| 26. | Gasket | Polyamide |
| 27. | Air plug | Stainless steel |
| 28. | Shaft | Stainless steel 1.4404 (316L) |
| 29. | Connector | Stainless steel 1.4408 |
| 30. | Spacer | Stainless Steel 1.4401 (316) |
| 31. | O-ring | EPDM rubber |
| 32. | Bushing | Brass, DZR CW602N (CZ132) |
| 33. | Weight | Ductile iron GJS-500-7 (GGG-50) |
| 34. | Set screw | Stainless steel A4 |
| 35. | Nut | Stainless steel A4 |
| 36. | Bolt | Stainless steel A4 |
Standards
- Face to face: EN 558-2, Ser. 48
- Flange drilling to AS/NZS 4087 B5
